From cPad Firmware version 1.12.2 and above it is possible to accomodate a discount charging model for Duplex Copying on selected models.
In the advanced config menu of the cPad, the advanced configuration setting 'ext-device.cartadis_cpad.copier-make' needs to be set to one of the following depending on the device in use. Please note that the drivers listed usually work for a family of devices
|Brand||config key entry||supported/tested models||notes|
|Konica Minolta||konica_driver||Can charge duplex for copies|
|Konica Minolta||konicaminolta||Can charge duplex for copies|
|Kyocera||Kyocera||Cannot charge duplex copies|
|Ricoh||ricohMP2501||Can charge duplex copies for all Ricoh black & white|
|Ricoh||ricohMPC2051||Can charge duplex copies for all Ricoh colour|
|Ricoh||ricohMPC3003||Only use this driver for this specific model|
|Xerox||xerox550||Can charge duplex copies|
|Xerox||xeroxWC7120||Can charge duplex copies|
|Xerox||xeroxWC7225||Can charge duplex copies|
The above config keys will generally work across the family of device. However you may need some trial and error. If you confirm a device compatibility on a model please let us know and we will add that device to this KB article and improve the experience for others. If no driver works then we can assist in running a MIB walk to get the correct OID’s. However this relies on the OID being publicly available over SNMP. Please note that no duplex charging on cPad exists for Canon devices.
Set 'ext-device.cartadis_cpad.printer-ip-address' to the IP Address of the MFD
Set the requested pricing in the Advanced Charging Tab, see example below: